PTCL EVO is one of the best source of wireless internet connectivity and it offers coverage in more than 250 cities in pakistan nationwide. But sometimes eVo customers are returning their devices within 3 days because of dis-satisfaction or no signals at there homes or offices. So i thought there should be some method to strengthen the eVo signals so that customers can enjoy the great internet service out there.
There are 2 methods which i tried and found great.
Method # 1:
Get a CD with both sides empty (meaning no sticker on either side) and flip it over to EVO device's antenna.
Method # 2:
You will need a thin wire (preferably silver or copper).
To get started turn the wires around the antenna, so as to form a spiral
around it as shown. The top part should stick out about 10 cms, and
then you will need to add some more spirals (three or four) such that
they are roughly 5 cm. After that you need to leave a straight wire
about 1.5 cm in length. To turn the wire, I would suggest you twist it around a pencil or pen and then adjust the spiral distance by hand.
There are 2 methods which i tried and found great.
Method # 1:
Get a CD with both sides empty (meaning no sticker on either side) and flip it over to EVO device's antenna.
Method # 2:
ya , this is good ieda
ReplyDeletethanks
ReplyDeletebut most of evo's not have antenna... right.(Pak). So should do for antenna?
thanks
yes this technique is useful for antenna evo devices.
Deletethanks
ReplyDeletethis is good idea
but the new models are now without antenna they have built in antenna inside the device what about them???
ReplyDeleteAfter that you need to leave a straight wire about 1.5 cm in length. outdoor hdtv antenna
ReplyDelete