How to do PTCL DSL Modem and Router configuration

Hi guys, today i am going to share with you the most important and useful information regarding PTCL DSL modem configuration. This is a common problem that our internet stops working and we have no knowledge about what to do. There are two methods of configuring PTCL DSL router.


1. Call 1236 Helpline:

One method id to call 1236 PTCL line anf ask them, they should configure you DSL modem remotely and the other method is to configure you modem manually.


2. Manual Method:

2nd method is to do manual configuration. First of all open Internet Explorer and write “192.168.1.1” in address bar and press enter. There must not be any proxy setting in the internet Explorer. This will open a login window and will ask for username and password to access the router console. The default username and password for router is admin/admin. So write admin in username box and admin in password box and click on login button.

How to access router using browser can be found in this post http://our-knowledge-base.blogspot.com/2012/11/how-to-do-ptcl-dsl-modem-and-router.html


How To Enter Settings ? After accessing your modem, enter the settings as shown in the images below.

• Click on "Quick Setup" or "Connect to Internet" then enter VPI and VCI click next (as shown in images)
• Follow the images for further configuration.

 VPI and VCI Settings:

• For Copper customers use VPI = 0 and VCI = 103 (If PTCL line form exchange to your nearest DP (Distribution Point) is of Copper)
• For Fiber customers use VPI = 8 and VCI = 81 (If PTCL link form exchange to you nearest DP (Distribution Point) is on Fiber)

DSL User-Name name and Password:

• (Default user name is you PTCL Land Line Number and Default Password is PTCL) or call 1236 and ask them for your DSL username and password.

  

 Thats is, You are done with manual settings of your router. Surf the internet and enjoy :)